Shopping Cart
# of Item(s): 0
Total: $0.00

Search Results

Found 10 product(s) for Seat Plate Control Mechanism (1-10 of 10)

..SP610- Office Chair Replacement Seat Plate 6" X 10" Mounting Holes ** FREE SHIPPING **
..SP610- Office Chair Replacement Seat Plate 6" X 10" Mounting Holes ** FREE SHIPPING **
The SP610 office chair seat plate is commonly used on Executive Tilt / Swivel chairs on the market.  It has a mounting hole pattern of 6" x 10".  This plate is rated for industry standard 250 pounds weight capacity.  Accepts standard 17-4 tapered gas lift.  Single lever for gas cylinder activation and when pushed for tilt lock - pull to unlock.  Hand wheel for tilt tension adjustment.  This style of office chair seat plate is the most commonly used in the industry.
Price: $29.95
..SP610HD- Heavy Duty Chair Swivel Tilt Seat Plate mechanism 6" X 10.15" Mounting Holes ** FREE SHIPPING **
..SP610HD- Heavy Duty Chair Swivel Tilt Seat Plate mechanism 6" X 10.15" Mounting Holes ** FREE SHIPPING **
The SP610HD is a heavier duty chair seat plate rated for up to 325 pound person.  The design of this office chair seat plate is universal and will fit any and all brands of chairs using a similar seat plate.  Accepts standard 17-4 tapered pneumatic gas cylinder.  Single lever to activate the gas cylinder and when pushed in to lock the tilt in forward position.  Hand wheel for tilt tension adjustment

Price: $39.95
..SP6125HD Tilt Swivel Rocking Butterfly Mechanism Heavy Duty 6"x10.25" **FREE SHIPPING**
..SP6125HD Tilt Swivel Rocking Butterfly Mechanism Heavy Duty 6"x10.25" **FREE SHIPPING**
Tilt Swivel Rocking Butterfly Mechanism Seat Plate Control Heavy Duty With Mounting Holes of 6"x10.25" (+/- 1/8") Mounting hole diameter is 1".  Mechanism rated for up to 325 pounds carrying capacity. This new replacement Swivel/Tilt Mechanism Control with Tilt Lock and Tension Knob accepts standard tapered gas cylinder.  Single lever for gas cylinder activation.  Push lever for tilt lock - pull to unlock. EXCEEDS BIFMA STANDARDS.
Price: $39.95
.CRT-1 Office Chair Pneumatic Gas Spring Cylinder Removal Separator Tool **FREE SHIPPING**
.CRT-1 Office Chair Pneumatic Gas Spring Cylinder Removal Separator Tool **FREE SHIPPING**
Office Chair Seat Plate Protector Gas Spring Pneumatic Cylinder Removal Separator Tool... This is a unique tool to assist in the separation / removal of the Gas Spring Spindle Cylinder from the Seat plate / Mechanism. The design is intended to transfer the shock wave from the hammer strikes close to where the taper is. IF YOU PURCHASE THIS ITEM WITH ANY OF OUR CYLINDERS OR SEAT PLATES, WE WILL REFUND $6.95 BACK TO PAYMENT METHOD.
Price: $11.95
.SP47- Chair Seat Plate Tilt / Lock Mechanism 4" X 7.15" +/- ** FREE SHIPPING **
.SP47- Chair Seat Plate Tilt / Lock Mechanism 4" X 7.15" +/- ** FREE SHIPPING **
The SP47 chair seat plate mechanism has mounting hole pattern of 4" x 7.15".  It is commonly used on medium or large executive chairs.  It is used with standard 17-4 tapered pneumatic gas cylinders. It has 1 lever to activate the pneumatic gas cylinder and when pushed in, it locks the mechanism in forward position.  Hand wheel for tilt tension adjustment.  
Price: $29.95
KT-100 Office Chair Knee Tilt Mechanism Control Replacement part 6" X 8.6" holes **FREE SHIPPING**
KT-100 Office Chair Knee Tilt Mechanism Control Replacement part 6" X 8.6" holes **FREE SHIPPING**
Office Chair Knee Tilt Mechanism Control Replacement part 6" X 8.6" mounting holes.  This is heavy duty brand new Knee Tilt Mechanism with forward lock.  This unit will replace any and all brands of knee Tilt Mechanisms regardless of chair brand AS LONG AS THE MOUNTING HOLE PATTERN IS THE SAME.  Mounting holes are spaced 6" X 8.6".  The hole for the pneumatic cylinder will accept industry standard 17-4 taper. 1 handle is used for trigger pneumatic cylinder for height adjustment. When pushed in, the TILT feature is locked in forward position.
Price: $59.95
KTM-330 Knee Tilt Mechanism Control Forward Lock ** FREE SHIPPING **
KTM-330 Knee Tilt Mechanism Control Forward Lock ** FREE SHIPPING **
Listing is for a brand new Knee Tilt Mechanism with forward lock.  This unit will replace any and all brands of knee Tilt Mechanisms regardless of chair brand AS LONG AS THE MOUNTING HOLE PATTERN IS THE SAME.  Mounting holes are spaced 200mm x 200mm (+/-) 7.874" x 7.874".  The hole for the pneumatic cylinder will accept industry standard 17-4 taper.  1 handle is used to trigger the pneumatic cylinder for height adjustment and when pushed out, it locks mechanism in forward position.
Price: $49.95
KTM-S Knee Tilt Mechanism Control With Infinite Lock ** FREE SHIPPING **
KTM-S Knee Tilt Mechanism Control With Infinite Lock ** FREE SHIPPING **
Listing is for a brand new Knee Tilt Mechanism with infinite lock.  This unit will replace any and all brands of knee Tilt Mechanisms regardless of chair brand AS LONG AS THE MOUNTING HOLE PATTERN IS THE SAME.  Mounting holes are spaced 200mm x 198mm (+/-) 7.874" x 7.80" (+/- 1/16").  The hole for the pneumatic cylinder will accept industry standard 17-4 taper.

1 handle is used to trigger pneumatic cylinder for height adjustment
1 handle is used to lock the knee tilt mechanism in any angle.
Price: $59.95
Multi Function Chair Mechanism Control Seat Plate Heavy Duty 6 1/8" x 5.5" Holes
Multi Function Chair Mechanism Control Seat Plate Heavy Duty 6 1/8" x 5.5" Holes

Multi Function Chair Mechanism Control Seat Plate Heavy Duty 6 1/8" x 5.5" Mounting Holes.  This type of mechanism is primarily used on managerial / executive task chair or extensive use chairs.  Listing is for 1 brand new replacement Multi Function Chair Mechanism Control with Tilt Infinite Lock and Tension Knob.  Accepts standard 17-4 tapered pneumatic gas cylinder with 1.1” diameter shaft.

MOUNTING HOLE PATTERN: 6 1/8" X 5.5" (+/-)
Price: $39.95
SPJ-1 Basic Seat Plate with J-Bar Bracket **FREE SHIPPING**
SPJ-1 Basic Seat Plate with J-Bar Bracket **FREE SHIPPING**
This basic seat plate is commonly used on small chairs or exam / doctor stools that require a back.  This seat plate has a bracket at the back to slide a J-Bar in and tighten with a knob (included).  It meets or exceeds BIFMA standards.  Mounting holes are spaced 4" x 7" (+/-1/8")
Price: $19.95